Photo by Alex Gorzen on Flickr
More Limes, More Coconuts
In previous blog posts I reviewed how to deploy KubeCF on EKS, which gives you a nice stable deployment of KubeCF, the downside is this costs you money for every hour it is run on AWS.
I used to giving Amazon money, but I typically get a small cardboard box in exchange every few days.
So, how do you run KubeCF on your Mac for free(ish)? Tune in below.
There Be Dragons Ahead
You need at least a 16GB of memory installed on your Apple MacOS device, the install will use around 11GB of the memory once it is fully spun up.
The install is fragile and frustrating at times, this is geared more towards operators who are trying out skunkworks on the platform such as testing custom buildpacks, hacking db queries and other potentially destructive activities. The install does NOT survive reboots and become extra brittle after 24+ hours of running. This is not KubeCF’s fault, when run on EKS it will happily continue to run without issues. You’ve been warned!
Overview of Install
- Install Homebrew and Docker Desktop
- Install
tuntapand start the shim - Install
kindand deploy a cluster - Install and configure
metallb - Install
cf-operatorand deploykubecf - Log in and marvel at your creation
The next few sections are borrowed heavily from https://www.thehumblelab.com/kind-and-metallb-on-mac/, I encourage you to skim this document to understand why the tuntap shim is needed and how to verify the configuration for metallb.
Install Homebrew and Docker Desktop
I won’t go into great detail as these tools are likely already installed:
- Homebrew (full details are here: https://docs.brew.sh/Installation) or just run:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"- Docker Desktop (full details for install are at: https://docs.docker.com/desktop/mac/install/) or run:
brew install --cask docker
# Then launch docker from Applications to complete the install and start dockerInstall tuntap and start the shim
Running docker on MacOS has some “deficiencies” that can be overcome by installing a networking shim, to perform this install:
brew install git
brew install --cask tuntap
git clone https://github.com/AlmirKadric-Published/docker-tuntap-osx.git
cd docker-tuntap-osx
./sbin/docker_tap_install.sh
./sbin/docker_tap_up.shInstall kind and deploy a cluster
Sweet’n’Simple:
brew install kind
kind create clusterInstall and configure metallb
We’ll be using metallb as a LoadBalancer resource and open up a local route so that MacOS can route traffic locally to the cluster.
sudo route -v add -net 172.18.0.1 -netmask 255.255.0.0 10.0.75.2
kubectl apply -f https://raw.githubusercontent.com/metallb/metallb/v0.9.3/manifests/namespace.yaml
kubectl create secret generic -n metallb-system memberlist --from-literal=secretkey="$(openssl rand -base64 128)"
kubectl apply -f https://raw.githubusercontent.com/metallb/metallb/v0.9.3/manifests/metallb.yaml
cat << EOF > metallb-config.yaml
apiVersion: v1
kind: ConfigMap
metadata:
namespace: metallb-system
name: config
data:
config: |
address-pools:
- name: default
protocol: layer2
addresses:
- 172.18.0.150-172.18.0.200
EOF
kubectl create -f metallb-config.yamlInstall cf-operator and deploy kubecf
brew install wget
brew install helm
brew install watch
wget https://github.com/cloudfoundry-incubator/kubecf/releases/download/v2.7.13/kubecf-bundle-v2.7.13.tgz
tar -xvzf kubecf-bundle-v2.7.13.tgz
kubectl create namespace cf-operator
helm install cf-operator \
--namespace cf-operator \
--set "global.singleNamespace.name=kubecf" \
cf-operator.tgz \
--wait
helm install kubecf \
--namespace kubecf \
--set system_domain=172.18.0.150.nip.io \
--set features.eirini.enabled=false \
--set features.ingress.enabled=false \
--set services.router.externalIPs={172.18.0.150}\
https://github.com/cloudfoundry-incubator/kubecf/releases/download/v2.7.13/kubecf-v2.7.13.tgz
watch kubectl get pods -ANow, go take a walk, it will take 30-60 minutes for the kubecf helm chart to be fully picked up by the cf-operator CRDs and are scheduled for running. When complete, you should see output similar to:
Every 2.0s: kubectl get pods -A
NAMESPACE NAME READY STATUS RESTARTS AGE
cf-operator quarks-cd9d4b96f-rtkbt 1/1 Running 0 40m
cf-operator quarks-job-6d8d744bc6-pmfnd 1/1 Running 0 40m
cf-operator quarks-secret-7d76f854dc-9wp2f 1/1 Running 0 40m
cf-operator quarks-statefulset-f6dc85fb8-x6jfb 1/1 Running 0 40m
kube-system coredns-558bd4d5db-ncmh5 1/1 Running 0 41m
kube-system coredns-558bd4d5db-zlpgg 1/1 Running 0 41m
kube-system etcd-kind-control-plane 1/1 Running 0 41m
kube-system kindnet-w4m9n 1/1 Running 0 41m
kube-system kube-apiserver-kind-control-plane 1/1 Running 0 41m
kube-system kube-controller-manager-kind-control-plane 1/1 Running 0 41m
kube-system kube-proxy-ln6hb 1/1 Running 0 41m
kube-system kube-scheduler-kind-control-plane 1/1 Running 0 41m
kubecf api-0 17/17 Running 1 19m
kubecf auctioneer-0 6/6 Running 2 20m
kubecf cc-worker-0 6/6 Running 0 20m
kubecf cf-apps-dns-76947f98b5-tbfql 1/1 Running 0 39m
kubecf coredns-quarks-7cf8f9f58d-msq9m 1/1 Running 0 38m
kubecf coredns-quarks-7cf8f9f58d-pbkt9 1/1 Running 0 38m
kubecf credhub-0 8/8 Running 0 20m
kubecf database-0 2/2 Running 0 38m
kubecf database-seeder-0bc49e7bcb1f9453-vnvjm 0/2 Completed 0 38m
kubecf diego-api-0 9/9 Running 2 20m
kubecf diego-cell-0 12/12 Running 2 20m
kubecf doppler-0 6/6 Running 0 20m
kubecf log-api-0 9/9 Running 0 20m
kubecf log-cache-0 10/10 Running 0 19m
kubecf nats-0 7/7 Running 0 20m
kubecf router-0 7/7 Running 0 20m
kubecf routing-api-0 6/6 Running 1 20m
kubecf scheduler-0 12/12 Running 2 19m
kubecf singleton-blobstore-0 8/8 Running 0 20m
kubecf tcp-router-0 7/7 Running 0 20m
kubecf uaa-0 9/9 Running 0 20m
local-path-storage local-path-provisioner-547f784dff-r8trf 1/1 Running 1 41m
metallb-system controller-fb659dc8-dhpnb 1/1 Running 0 41m
metallb-system speaker-h9lh9 1/1 Running 0 41mLog in and marvel at your creation
To login with the admin uaa user account:
cf api --skip-ssl-validation "https://api.172.18.0.150.nip.io"
acp=$(kubectl get secret \
--namespace kubecf var-cf-admin-password \
-o jsonpath='{.data.password}' \
| base64 --decode)
cf auth admin "${acp}"
cf create-space test -o system
cf target -o system -s testOr, to use smoke_tests uaa client account (because you’re a rebel or something):
cf api --skip-ssl-validation "https://api.172.18.0.150.nip.io"
myclient=$(kubectl get secret \
--namespace kubecf var-uaa-clients-cf-smoke-tests-secret \
-o jsonpath='{.data.password}' \
| base64 --decode)
cf auth cf_smoke_tests "${myclient}" --client-credentials
cf create-space test -o system
cf target -o system -s testCleaning Up and Putting Your Toys Away
If you are done with the deployment of KubeCF you have two options:
- Put your creation to sleep. Start Docker Desktop > Dashboard > Select
kind-control-placeand click “Stop”. Go have fun, when you come back, click “Start”. After a few minutes the pods will recreate and become healthy - Clean up. To remove the cluster and custom routing:
kind delete cluster
sudo route delete 172.18.0.0
./sbin/docker_tap_uninstall.shDebugging Issues
Get used to seeing:
Request error: Get “https://api.172.18.0.150.nip.io”: dial tcp 172.18.0.150:443: i/o timeout
The api server is flaky, try whatever you were doing again after verifying all pods are running as seen in the Install cf-operator and deploy kubecf section.
Follow up
Have questions? There is an excellent community for KubeCF which can be found at https://cloudfoundry.slack.com/archives/CQ2U3L6DC as kubecf-dev in Slack. You can ping me there via @cweibel
I also have Terraform code which will spin up a VPC + EKS + KubeCF for a more permanent solution to running KubeCF not on a Mac, check out https://github.com/cweibel/example-terraform-eks/tree/main/eks_for_kubecf_v2 for more details.
Enjoy!
Spread the word
